BIOS Beep Code and How to Solve Problems

BIOS stands for Basic Input output, the system is designed for the first time once run by the PC is turned on. Initial function of the BIOS is to identify, test, and initialize the hardware installed on the PC such as VGA Card, CD / DVD ROM, hard disk, memory and other hardware on the computer. When the computer is turned on, the computer will play a single beep (in some computer with the type of BIOS may beep twice) and continue with the normal process, but if there is a problem in computer hardware, the bios will play the sound bib as error codes, the number of long or short sound and the sound of bib is a hardware error codes from the installed on the computer. BIOS is most often used is AMI BIOS, AWARD, IBM and PHOENIX.

The error code in the BIOS is characterized by long or short beep or a combination of sounds.With the software "Beeb Rizone Viewer" you can easily figure out the problem on the computer hardware to listen to the beep in the BIOS. Software Rizone Beeb Viewer is free software and software-compatible. The software is portable, contains complete information about the meaning of the Beeb sound on your computer and there are also several types of bios that usually circulate for several types of motherboards.

You can download the software here first Countermeasures If you make Is Computer Beep Codes: If the sound is heard, meaning there is an error after adding new hardware Unplug the hardware to determine the cause of the problem. If after removing the hardware and your computer is working normally, it means that your computer is not compatible with the hardware. Release, the CD / DVD, floppy disk or USB (if any) of the connection to the motherboard and then reboot your computer, if you no longer hear a beep, connect one by one device and boot your computer again. If when you install the sound device bib on when the computer is booted, this indicates the equipment was damaged, try doing the repair (service) or replace with new. 

Make sure all the fans on the computer running well. If the fan fails to work on your computer can lead to overheating (processor hot). Fan fails to work can cause the computer can not reboot. Remove the card any card that is installed on the computer, such as video card, LAN card, sound card or other and put one by one, until you find a damaged card. If all four of the above does not work check the power supply or motherboard, there is the possibility of a weaker component. If after doing all the above methods the error still appears, perhaps the motherboard, PSU, RAM or VGA cards on your computer one of them is damaged, you must replace the component or bring your computer to the service